home *** CD-ROM | disk | FTP | other *** search
- PRO34.5
-
-
- 16. NOTE: The keyboard lock switch is a funky little piece of plastic with a
- sliding stainless metal contactor that is just wedged inbetween the front
- case and the logic board. Remove both the switch contacts and the plastic
- switch. (best know it now or loose them in the carpet)
-
- 17. On the component side of the PC board you will see lots of nifty surface
- mounted compone]ts, a fat little barrel capacitor (used for maintaining
- the channel freqs while you change the batteries.. and make
- modifications:) near the edge of the PC board you will see a couple of
- small diodes moutned vertically. These will be labeled on the PC board as
- D10 and D11, you will also see a place for another diaode to be soldered
- in but was not installed at the factory.. this is D9.
- CONTINUED IN FILE PRO34.13